If you missed out last time, here’s your chance to take part in this hugely successful EV training. International expert trainer Dirk Fuchs will fly back into Melbourne to deliver his Level 3 (to European ECE R100 standard) high voltage training. In addition, he’ll deliver Level 4 training, which includes training in working under live conditions.
Groups numbers are capped at 12, so don’t delay in registering your interest.
The Level 3 course covers:
- 2.5 days’ in-person high voltage certification training
- Parallel and series electrical circuits
- Resistors, diodes and capacitors in HV systems
- Ohm’s law
- Transformers and rectifiers operation
- Relays and transistors function
- Vehicle intake process and safety measures
- Determining HV battery state
- Performing a four-wire measurement method
- Performing an insulation test
- EV diagnostic methods
- Performing manufacturer’s disconnecting procedure and verifying EV zero potential
- High voltage theoretical and practical assessment
- 45-minute theoretical exam (multiple choice)
- 30-minute practical exam: performing a certified disconnecting procedure; diagnosing high voltage system; bonding and insulation faults.
The Level 4 course covers:
- Disconnecting a live vehicle and bringing it in a safe state
- Safe high voltage battery removal process
- Personal protection when working under live conditions
- How to remove and replace battery modules
- How to perform insulation resistant testing in open batteries
- How to use a two-pole voltage tester at battery modules
- Performing battery enclosure and coolant testing
- Diagnostic methods on live electric vehicles
- Performing the replacement of high voltage battery contactors
- Balancing high voltage battery cells
- Safe diagnostic strategies when the system is in a live state.
When and where:
| Level 3 – Two workshops (Three days each) |
Level 4 – One workshop (Two days each) |
|
23 – 25 September 2024
30 September – 2 October 2024
Outer Northern Trade Training Centre,
407 High Street, Lalor
|
26 & 27 September 2024
3 & 4 October 2024 (FULL)
Outer Northern Trade Training Centre,
407 High Street, Lalor
|
Cost: $2,500 per course plus GST.
Download PDF registration form here.